【 Weak current College 】 battery terms 3 】

Cathode cathode terminals: columns

Positiveterminal

Connect the battery positive electrode terminals.

3.19 anode terminals: negative column

Negativeterminal

Connect battery negative electrode terminals.

3.20 electrolytes: electrolyte

Electrolyte

Play with mobile ion and Ionic conductivity of liquid or solid substances.

3.21 battery shell: battery slot

Container

Accommodate groups and electrolyte batteries from electrolyte corrosion of the container.

3.22 overall shell: overall Groove

monoblocContainer

With several cells, each cell can be equipped with a great group of battery shell.

3.23 saddle

mudribs

Battery slot bottom ribs or mounted on its bottom part, to support a group, on the detachment from plates down the active substances a

Particle deposition in it without causing a short circuit between the plates.

3.24 insulation card

EdgeInsulator

Ensure the plate edge and battery shell wall insulation between the parts.

3.25 battery cover

Cover

Lid

Often with filling holes, IL stomata and Terminal leads to bore closed battery shell components.

Note: tray, it can be closed several single battery shell.

3.26 sealants: sealing compound

Sealingcompound

To make the battery cover and shell or Terminal sealing material.

3.27 liquid hole plug: the plug

Ventplug

For closed filling holes while allowing the gas to escape.

3.28 exhaust valve

Ventvalve

When the internal pressure, allowing the gas to escape, but do not allow air to enter.

3.29 safety plug

Flamearresterventplug

When the battery is exposed to open flame or spark protection when external battery internal will not explode in a special structure of the device.

Liquid level indicator 3.30

Electrolytelevelindicator

Indicates the single battery electrolyte level height of installation.

3.31 retaining: Protection Board

Baffle

In most groups to reduce gas emanation or electrolyte movement outside the electrolyte, splash and to prevent foreign objects enter the filling hole

And damage to the insulating parts of polar groups.

3.32 connection: connector

IntercellConnector

For conducting the single battery current between the conductors.

3.33 output cable

Outputcable

Used to connect the battery charger with load or flexible cable.

3.34 terminal strip

Terminalconnector

For battery terminals and electrical connection of parts detection tester for electronic circuit.

3.35 battery combo box: battery shell

Batterytray

To accommodate several single battery or battery with the side walls of the container.

3.36 battery combo box

Batterycrate

To accommodate several monomers batteries or batteries of frame container.

3.37 battery cushion

Batterybase

Batterystand

Batterystillage

Typically for fixed-type insulation pad at the bottom of the battery.

3.38 battery holder

Batteryrack

One or more layers of a fixed-type battery bracket.